รอกโซ่ไฟฟ้า Electric Chain Hoists NICHI RCT2
Features
- Can be plugged into a 100V AC home power outlet for simple and easy operation.
- Shorter headroom enables greater hoisting distance. The rated load has also been increased by 250 kg for improved work efficiency.
- Oil bath lubrication keeps the gears and mechanical brake highly wear-resistant and durable.
- Friction-clutch over-winding protector*1 comes standard.
- The load chain is made from a special alloy steel for increased strength. A rustproof chain is optionally available.
- Use of a two-stage push-button allows you to change the operation speed with ease. A switch that can change the operation speed of a hoist via volume adjustment is optionally available.
- Used in combination with our hand crane system*2, this hoist allows you to make the best use of your workspace.
Specifications for Two-Speed Compact Electric Hoist RCT2
| Power supply | Type | Item no. | Rated load (kg) | Standard lift (m) | Hoisting speed*3 | DC motor output (W) | |
| Standard | Low | ||||||
| Single-phaseAC100V50/60Hz | 2-speed | RCT20010 | 100 | 3 | 0.167m/sec | 0.0167m/sec | 200 |
| 6 | [10m/min] | [1m/min] | |||||
| RCT20025 | 250 | 3 | 0.167m/sec | 400 | |||
| 6 | [10m/min] | ||||||
| RCT20049 | 490 | 3 | 0.0783m/sec | 400 | |||
| 6 | [4.7m/min] | ||||||
| Item no. | Short-time rating (min) | Duty cycle*4(%ED) | Hoist class | Load chain | Power cable length (m) | Net weight (kg) | |
| Diameter (mm) | No. of falls | ||||||
| RCT20010 | 25 | 40 | M3 | 4 | 1 | 5 | 13 |
| 14 | |||||||
| RCT20025 | 25 | 30 | M4 | 18 | |||
| 19 | |||||||
| RCT20049 | 25 | 30 | M4 | 2 | 20.5 | ||
| 23 | |||||||
| Item no. | External dimensions (mm) | |||||||||
| A | B | ♦C | D | E | ♦F | G | ♦P | ♦Q | ♦S (m) | |
| RCT20010 | 179 | 187 | 24 | 82 | 80 | 24 | 305 | 385 | 120 | 2.5 |
| 485 | 5.5 | |||||||||
| RCT20025 | 236 | 199 | 24 | 88 | 91 | 24 | 310 | 390 | 120 | 2.5 |
| 490 | 5.5 | |||||||||
| RCT20049 | 25 | 109 | 71 | 20 | 390 | 500 | 140 | 2.5 | ||
| 500 | 180 | 5.5 | ||||||||
Notes:
- Figures marked with a (♦) are for reference purposes only.
- Specifications are subject to change for improvements without notice.
- *1: The friction-clutch over-winding protector should not be activated except for emergency cases. DO NOT leave the over-winding protector running with the load suspended at the lifting and lowering limits.
- *2: A dedicated trolley will be required. Refer to the hand crane system section for details.
- *3: This is an average speed when the hoist is operating with a rated load. Hoisting speed is subject to change depending on whether lifting or lowering, on the size of a load, and on the voltage and frequency being used.
- *4: Duty cycle (%ED) is the ratio of the active (motor operating) time to the duration of a complete cycle. It is calculated based on the assumption that the hoist is lifting a load 63% of the rated one.
