DANFOSS DST X800 Series โพสิชันเซนเซอร์ (เซนเซอร์ตำแหน่ง)
คุณสมบัติ
- เทคโนโลยี Hall สำหรับอายุการใช้งานเซนเซอร์ที่ยาวนานเกือบไม่มีที่สิ้นสุด
- ช่วงการวัดแบบเดี่ยวหรือคู่: 1.8 – 8.3 เมตร
- Output: Analog หรือ CANopen
- ตัวเชื่อมต่อไฟฟ้า: M12 หรือสายเคเบิล
- ความเป็นเชิงเส้น: < ±0.5% FS
- ระดับการป้องกัน IP: IP67
Performance
| Features | Specifications |
| Measuring range | Strokes 1800mm – 2300mm – 3300mm – 4300mm – 4800mm – 5300mm – 6300mm – 7300mm – 8000mm – 8300mm |
| Linearity factory verification@ 25 °C | < ± 0.5% FS |
| Long term repeatability | < ±3% FS (for 1.80m, 2.30m, 3.30m) |
| < ±2% FS (for 4.30m, 4.80m, 5.30 m, 6.30m, 7.30 m, 8.00m, 8.30m) | |
| Resolution | 0.1mm CANopen output; 12 bit analog output |
| Speed | Max. 2 m/sec, typ. 1 m/sec |
| Typical acceleration | 1 g |
| Durability | 500,000 speed max. 1 m/sec acc. max. 0.5 g; |
| 150,000 speed max. 2 m/sec acc. max. 1 g |
Electrical specifications
| Features | Specifications |
| Electrical connections | M12 (4, 5 or 8 pin) connector or Cable |
| Output signal | 0.5 – 4.5 V DC, 0 – 10 V DC, 4 – 20 mA, CANopen |
| Supply voltage | 10 – 36 V DC |
| Current consumption | < 10 mA/per channel (no load) |
| MTFFd [Years] | CANopen: 220 |
| Analogue: 173 (Single channel) |
Ordering
| Output signal | Configurations | Code no. |
| 36 V; 0.5 – 4.5 V; | 1 x M12 5p; Single; 1,800 mm | 098G2000 |
| 36 V 0.5 – 4.5 V; | 1x M12 8p; Redundant; 1,800 mm | 098G2001 |
| 36 V; CANopen | 1 x M12 5p; Single; 1,800 mm | 098G2002 |
| 36 V; CANopen | 1x M12 8p; Redundant; 1,800 mm | 098G2003 |
| 36 V; 0.5 – 4.5 V; | 1 x M12 5p; Single; 4,800 mm | 098G2004 |
| 36 V; 0.5 – 4.5 V; | 1x M12 8p; Redundant; 4,800 mm | 098G2005 |
| 36 V; CANopen | 1 x M12 5p; Single; 4,800 mm | 098G2006 |
| 36 V; CANopen | 1x M12 8p; Redundant; 4,800 mm | 098G2007 |
| 36 V; 0.5 – 4.5 V; | 1 x M12 5p; Single; 8,300 mm | 098G2008 |
| 36 V; 0.5 – 4.5 V; | 1x M12 8p; Redundant; 8,300 mm | 098G2009 |
| 36 V; CANopen | 1 x M12 5p; Single; 8,300 mm | 098G2010 |
| 36 V; CANopen | 1x M12 8p; Redundant; 8,300 mm | 098G2011 |
Ordering code – on request
| Sensor type | |
| Wire transducer | S |
| Electrical connections | |
| M12 – 4-p connector | M |
| M12 – 5-p connector | N |
| M12 – 8-p connector (only for redundant versions) | O |
| Cable | F |
| Numbers of connectors | |
| Cable connection | O |
| 1 male M12-4-p connector (single version) or 1 male M12-5-p connector (single or half-redundant version) or 1 male M12 8-p connector (only redundant version) | 1 |
| 2 male M12-4-p connectors (redundant version) or 2 male M12-5-p connectors (redundant version) | 2 |
| 1 male M12-5-p connector and 1 M12-5-p female connector (only for IN-OUT CANopen version) | 3 |
| Circuit type | |
| Single | S |
| Redundant | R |
| Half-redundant | H |
| Measuring range | |
| Measuring range (specify) | |
| Available strokes: 1,800 mm; 2,300 mm; 3,300 mm; 4,300 mm; 4,800 mm; 5,300 mm; 6,300 mm; 7,300 mm; 8,000 mm; 8,300 mm | xxxx |
| Supply voltage | |
| 10…36 V DC | H |
| Output type | |
| 0.5…4.5 V DC (powered at 10 – 36 V DC) | A1 |
| 0…10 V DC output (powered at 11…36 V DC) | A2 |
| 4…20 mA output (powered at 10…36 V DC) | A3 |
| CANopen output (powered at 10…36 V DC) | C1 |
| Certificate | |
| No certificate attached | 0 |
| Linearity curve to be attached | L |
| Version | |
| Standard | 33 |
| Accessories | |
| No accessories | X |
| FLA033: fixing flange, A version | A |
| FLA034: fixing flange, B version | B |
| CON293: 4-pin female mating connector M12x1; IP67 | C |
| CON469: 8-pin female mating connector M12x1; IP67 | D |
| CON031: 5-pin female mating connector M12x1; IP67 | E |
| Cable length | |
| No cable | 0 |
| 2000 mm | 20 |
| Other on request | |
