DANFOSS DST X510 Series โพสิชันเซนเซอร์ (เซนเซอร์ตำแหน่ง)
FEATUER
- เทคโนโลยี Hall แบบไม่สัมผัส เพื่ออายุการใช้งานของเซ็นเซอร์ที่ยาวนานเกือบไร้ขีดจำกัด
- รองรับการวัดมุมได้สูงสุดถึง 360° (±180°) ทั้งแบบ Single หรือ Redundant
- Output : แบบ Analog, CANopen และ SAE J1939
- ความแม่นยำเชิงเส้น: < ± 0.5 FS
- ความละเอียด: ◦ 12 bit (analog) ◦ 14 bit (CANopen/SAE J1939)
- ระดับการป้องกัน IP67 – IP69K เมื่อใช้กับขั้วต่อแบบ Female Mating
Technical data
Table 1 : Performance
| Measuring range | 360° (±180°) | |
| Linearity | ≤ ± 0.5% FS | |
| Resolution and speed of rotation | 12 bit (analog output) | 120 rpm max. |
| 14 bit (CANopen/SAE J1939 output) | ||
| Durability (stroke ±75°) | 35 M operations | |
Table 2 : Performance
| Electrical connections | Deutsch 6P DT04-6p or AMP Superseal 6p 282108 |
| Output signal | CANopen / SAE J1939, Ratiometric 10-90% of Vs, 0.5–4.5 V DC, 0 –10 V DC or 4–20 mA |
| Supply voltage | CANopen/J1939, 0.5–4.5 V DC, 4–20 mA: 9–36 V DC; 0–10 V DC: 11–36 V DC; Ratiometric: 10-90% of Vs: 5 V DC |
| Current consumption | Analogue: < 10 mA/ pr. channel (no load) CANopen/J1939: < 15 mA (no load) |
| MTTFd [Years] | CANopen/J1939: 336 Analogue: 406 (Single Channel) |
Table 3 : Environmental conditions
|
Operating temperature range |
-40 °C – 85 °C |
||
|
Thermal drift temperature |
< 50 ppm/°C |
||
|
EMC |
Emission |
EN 55011 and CISPR 25 |
|
|
Immunity |
EN 61236-3-2 and ISO 11452-2 |
||
|
Transient on supply lines |
ISO 7637-2 |
||
|
Bulk current injection |
ISO 11452-4 |
||
|
Vibration stability |
Sinusoidal |
20 g, 10 Hz – 2,000 kHz |
IEC 60068-2-6 |
|
Shock resistance |
Impulsive on 3 axes |
50 g, 11 ms |
IEC 60068-2-27 |
|
IP protection |
IP67 – IP69 (with mating connector) |
||
| Operating temperature range | -40 °C – 85 °C | ||
| Thermal drift temperature | < 50 ppm/°C | ||
| EMC | Emission | EN 55011 and CISPR 25 | |
| Immunity | EN 61236-3-2 and ISO 11452-2 | ||
| Transient on supply lines | ISO 7637-2 | ||
| Bulk current injection | ISO 11452-4 | ||
| Vibration stability | Sinusoidal | 20 g, 10 Hz – 2,000 kHz | IEC 60068-2-6 |
| Shock resistance | Impulsive on 3 axes | 50 g, 11 ms | IEC 60068-2-27 |
| IP protection | IP67 – IP69 (with mating connector) | ||
Table 4 : Mechanical characteristics
| Materials | Enclosure | PBT (Polybutylene terephthalate) |
| Shaft | AISI 316L | |
| Net weight | 0.07 kg | |
Dimensions
Ordering standard
| Type | Output signal | Cofigurations | Code no. |
| DST X510 | 5 V Ratiometric | ±180° Clockwise CW | 098G1000 |
| 5 V Ratiometric | ±180° Counterclokwise CCW/CH2 clockwise CW | 098G1001 | |
| 36 V CANopen | ±180° Clockwise CW | 098G1002 | |
| 36 V SAE J1939 | ±180° Clockwise CW | 098G1003 |
Ordering code – on request
| Electrical connections | |
| AMP Superseal 6P connector | A |
| Deutsch 6P connector | D |
| Circuit type | |
| Single Analog or CAN/J 1939 | S |
| Redundant Analog | R |
| Angle/Channel 1 (output for single channel) | |
| (Analog output A1-A2-A3 programmable in steps of ±15°) (CAN/J 1939 = 180) | xxx |
| Angle/Channel 2 (redundant versions) | |
| (Analog output A1-A2-A3 programmable in steps of ±15°) (CAN/J 1939 = 180) | xxx |
| Supply voltage | |
| +5 V DC (only for A1 output) | L |
| +9…+36 V DC (see output signal for right supply voltage) | H |
| Output type | |
| +0.5…+4.5 V DC output (available with supply L = ratiometric output and with supply H = 0.5. 4.5 V output) | A1 |
| 0…+10 V DC output (powered at +11..36 V DC) | A2 |
| 4…20 mA output (powered at +9…36 V DC) | A3 |
| CANopen output (powered at +9…36 V DC) (available in single version with +/-180° measurement range) | C1 |
| SAE J1939 (powered at +9…36 V DC) (available in single version with +/-180° measurement range) | C2 |
| Rotation direction | |
| Clockwise CW (single) both clockwise CW (redundant or CAN/J1939) | 1 |
| Counterclockwise CCW (single) both counterclockwise CCW (redundant or CAN/J1939) | 2 |
| CHANNEL 1 clockwise CW and CHANNEL 2 counterclockwise CCW (only for redundant version and CAN/J1939) | 3 |
| CHANNEL 1 counterclockwise CCW and CHANNEL 2 clockwise CW (only for redundant version and CAN/J1939) | 4 |
| Actuator | |
| Shaft | A |
| Reserved | |
| Always | 0 |
| Certificate | |
| No certificate attached | 0 |
| Linearity curve to be attached | L |
| Version | |
| Standard | 33 |
| Accessories | |
| No accessories | X |
| AISi 304 LEVER | A |
| Reserved | |
| Always | 0 |
